Finishing Seminars at Atlantic Plywood
These half-day application seminars take place at Atlantic Plywood branches. Please refer to the schedule to find a location and date that best
fits your needs. Due to limited space, preregistration is recommended. The cost for each of these seminars is $75 per person for your 1st attendee,
and $50 for each additional attendee from your company, and will be billed at the time of registration.
Contact your local branch or lacquer specialist to sign up.
Fundamentals of Wood Finishing
This application seminar will introduce you to basic coatings technology, proper sanding techniques, and material prep prior to spraying.
This seminar will also review equipment setup and proper finishing techniques. Two systems will be completed during this seminar, a stain
with a sealer and clear coat and a primer with a pigmented topcoat.
Greenguard Approved and Leed Certified Coatings
This application seminar will introduce you to the Greenguard approved and LEED Certified coatings that are available through ML
Campbell. This seminar is designed to improve your knowledge and application techniques of Greenguard approved coatings, with
special emphasis on the Agualante Waterbourne Pre-Cat, EnviroVar, and EnviroMax formaldehyde-free solvent-bourne coatings.
Shading and Toning Techniques
This application seminar is designed to improve your knowledge and application techniques used to create color in wood. Wiping Stains,
Spray stains, Toners, and Shading Lacquers are all used as part of a single step or multi-step wood coloring system. Learn how to create
high-end finishes with the depth and contrast that your clients demand.
|E Prov ||8/22|
C.A. Technologies Shop Audit and Spray Equipment Seminar
This application seminar is presented by CA Technologies. It is designed to emphasize the importance of how proper setup of the spray room
and equipment and the correct amount of clean compressed air directly affects the end result of your finishing project. Learn how to evaluate
your shop's finishing area setup from the compressor to the spray booth. Learn the basics of compressed air, siphon guns, pressure guns,
gravity guns, pressure pots, air assisted airless pump systems, how to correctly setup this equipment, and the techniques used to deliver
the perfect finish.
Mirka Abrasives Buffing and Polishing Seminar
This application seminar is presented by Mirka Abrasives. It is designed to give you a better understanding of the proper equipment and
techniques used in the sanding, buffing, and polishing process. This hands-on seminar will help you master a flawless high gloss finish.
Euro 2-K Polyurethane Finishing Seminar
This application seminar is designed to improve your knowledge and application skills of the Euro X 2-component polyurethane and the Eurobild
2-component interior polyurethane. Learn the proper mixing and application techniques required to achieve the ultimate finish this product has to offer.
The New Furniture Line Finishing Seminar
This application seminar will introduce you to ML Campbell’s premium line of furniture coatings. This seminar will emphasize the new Design-R-Classic
nitrocellulose line and the new Design-R-Select pre-catalyzed line of furniture coatings. This hands-on seminar is designed to improve your knowledge
of sanding, gun setup, and application of spray-only NGR stains, shading and toning techniques, and applying the new furniture line nitrocellulose and
pre-catalyzed topcoats. Learn the newest techniques in finishing high-end furniture.
Troubleshooting Common Finishing Problems
This seminar is designed to help recognize common problems that occur in the wood finishing process. Learn how to recognize what the problem is and how
to fix it prior to the next coat. Wrinkling, solvent entrapment, crazing, adhesion failure, and hazing are only some of the issues that will be covered.
Learn how to overcome these issues without losing time in your finishing process.
|E Prov ||9/26|